% Generated by roxygen2: do not edit by hand
% Please edit documentation in R/mkinfit.R
\name{mkinfit}
\alias{mkinfit}
\title{Fit a kinetic model to data with one or more state variables}
\source{
Rocke, David M. und Lorenzato, Stefan (1995) A two-component model
for measurement error in analytical chemistry. Technometrics 37(2), 176-184.
}
\usage{
mkinfit(mkinmod, observed, parms.ini = "auto", state.ini = "auto",
err.ini = "auto", fixed_parms = NULL,
fixed_initials = names(mkinmod$diffs)[-1], from_max_mean = FALSE,
solution_type = c("auto", "analytical", "eigen", "deSolve"),
method.ode = "lsoda", use_compiled = "auto",
control = list(eval.max = 300, iter.max = 200),
transform_rates = TRUE, transform_fractions = TRUE, quiet = FALSE,
atol = 1e-08, rtol = 1e-10, n.outtimes = 100,
error_model = c("const", "obs", "tc"),
error_model_algorithm = c("auto", "d_3", "direct", "twostep",
"threestep", "fourstep", "IRLS", "OLS"), reweight.tol = 1e-08,
reweight.max.iter = 10, trace_parms = FALSE, ...)
}
\arguments{
\item{mkinmod}{A list of class \code{\link{mkinmod}}, containing the kinetic
model to be fitted to the data, or one of the shorthand names ("SFO",
"FOMC", "DFOP", "HS", "SFORB", "IORE"). If a shorthand name is given, a
parent only degradation model is generated for the variable with the
highest value in \code{observed}.}
\item{observed}{A dataframe with the observed data. The first column called
"name" must contain the name of the observed variable for each data point.
The second column must contain the times of observation, named "time".
The third column must be named "value" and contain the observed values.
Zero values in the "value" column will be removed, with a warning, in
order to avoid problems with fitting the two-component error model. This
is not expected to be a problem, because in general, values of zero are
not observed in degradation data, because there is a lower limit of
detection.}
\item{parms.ini}{A named vector of initial values for the parameters,
including parameters to be optimised and potentially also fixed parameters
as indicated by \code{fixed_parms}. If set to "auto", initial values for
rate constants are set to default values. Using parameter names that are
not in the model gives an error.
It is possible to only specify a subset of the parameters that the model
needs. You can use the parameter lists "bparms.ode" from a previously
fitted model, which contains the differential equation parameters from
this model. This works nicely if the models are nested. An example is
given below.}
\item{state.ini}{A named vector of initial values for the state variables of
the model. In case the observed variables are represented by more than one
model variable, the names will differ from the names of the observed
variables (see \code{map} component of \code{\link{mkinmod}}). The default
is to set the initial value of the first model variable to the mean of the
time zero values for the variable with the maximum observed value, and all
others to 0. If this variable has no time zero observations, its initial
value is set to 100.}
\item{err.ini}{A named vector of initial values for the error model
parameters to be optimised. If set to "auto", initial values are set to
default values. Otherwise, inital values for all error model parameters
must be given.}
\item{fixed_parms}{The names of parameters that should not be optimised but
rather kept at the values specified in \code{parms.ini}. Alternatively,
a named numeric vector of parameters to be fixed, regardless of the values
in parms.ini.}
\item{fixed_initials}{The names of model variables for which the initial
state at time 0 should be excluded from the optimisation. Defaults to all
state variables except for the first one.}
\item{from_max_mean}{If this is set to TRUE, and the model has only one
observed variable, then data before the time of the maximum observed value
(after averaging for each sampling time) are discarded, and this time is
subtracted from all remaining time values, so the time of the maximum
observed mean value is the new time zero.}
\item{solution_type}{If set to "eigen", the solution of the system of
differential equations is based on the spectral decomposition of the
coefficient matrix in cases that this is possible. If set to "deSolve", a
numerical ode solver from package \code{\link{deSolve}} is used. If set to
"analytical", an analytical solution of the model is used. This is only
implemented for simple degradation experiments with only one state
variable, i.e. with no metabolites. The default is "auto", which uses
"analytical" if possible, otherwise "deSolve" if a compiler is present,
and "eigen" if no compiler is present and the model can be expressed using
eigenvalues and eigenvectors. This argument is passed on to the helper
function \code{\link{mkinpredict}}.}
\item{method.ode}{The solution method passed via \code{\link{mkinpredict}}
to \code{\link{ode}} in case the solution type is "deSolve". The default
"lsoda" is performant, but sometimes fails to converge.}
\item{use_compiled}{If set to \code{FALSE}, no compiled version of the
\code{\link{mkinmod}} model is used in the calls to
\code{\link{mkinpredict}} even if a compiled version is present.}
\item{control}{A list of control arguments passed to \code{\link{nlminb}}.}
\item{transform_rates}{Boolean specifying if kinetic rate constants should
be transformed in the model specification used in the fitting for better
compliance with the assumption of normal distribution of the estimator. If
TRUE, also alpha and beta parameters of the FOMC model are
log-transformed, as well as k1 and k2 rate constants for the DFOP and HS
models and the break point tb of the HS model. If FALSE, zero is used as
a lower bound for the rates in the optimisation.}
\item{transform_fractions}{Boolean specifying if formation fractions
constants should be transformed in the model specification used in the
fitting for better compliance with the assumption of normal distribution
of the estimator. The default (TRUE) is to do transformations. If TRUE,
the g parameter of the DFOP and HS models are also transformed, as they
can also be seen as compositional data. The transformation used for these
transformations is the \code{\link{ilr}} transformation.}
\item{quiet}{Suppress printing out the current value of the negative
log-likelihood after each improvement?}
\item{atol}{Absolute error tolerance, passed to \code{\link{ode}}. Default
is 1e-8, lower than in \code{\link{lsoda}}.}
\item{rtol}{Absolute error tolerance, passed to \code{\link{ode}}. Default
is 1e-10, much lower than in \code{\link{lsoda}}.}
\item{n.outtimes}{The length of the dataseries that is produced by the model
prediction function \code{\link{mkinpredict}}. This impacts the accuracy
of the numerical solver if that is used (see \code{solution_type}
argument. The default value is 100.}
\item{error_model}{If the error model is "const", a constant standard
deviation is assumed.
If the error model is "obs", each observed variable is assumed to have its
own variance.
If the error model is "tc" (two-component error model), a two component
error model similar to the one described by Rocke and Lorenzato (1995) is
used for setting up the likelihood function. Note that this model
deviates from the model by Rocke and Lorenzato, as their model implies
that the errors follow a lognormal distribution for large values, not a
normal distribution as assumed by this method.}
\item{error_model_algorithm}{If "auto", the selected algorithm depends on
the error model. If the error model is "const", unweighted nonlinear
least squares fitting ("OLS") is selected. If the error model is "obs", or
"tc", the "d_3" algorithm is selected.
The algorithm "d_3" will directly minimize the negative log-likelihood and
- independently - also use the three step algorithm described below. The
fit with the higher likelihood is returned.
The algorithm "direct" will directly minimize the negative log-likelihood.
The algorithm "twostep" will minimize the negative log-likelihood after an
initial unweighted least squares optimisation step.
The algorithm "threestep" starts with unweighted least squares, then
optimizes only the error model using the degradation model parameters
found, and then minimizes the negative log-likelihood with free
degradation and error model parameters.
The algorithm "fourstep" starts with unweighted least squares, then
optimizes only the error model using the degradation model parameters
found, then optimizes the degradation model again with fixed error model
parameters, and finally minimizes the negative log-likelihood with free
degradation and error model parameters.
The algorithm "IRLS" (Iteratively Reweighted Least Squares) starts with
unweighted least squares, and then iterates optimization of the error
model parameters and subsequent optimization of the degradation model
using those error model parameters, until the error model parameters
converge.}
\item{reweight.tol}{Tolerance for the convergence criterion calculated from
the error model parameters in IRLS fits.}
\item{reweight.max.iter}{Maximum number of iterations in IRLS fits.}
\item{trace_parms}{Should a trace of the parameter values be listed?}
\item{\dots}{Further arguments that will be passed on to
\code{\link{deSolve}}.}
}
\value{
A list with "mkinfit" in the class attribute. A summary can be
obtained by \code{\link{summary.mkinfit}}.
}
\description{
This function maximises the likelihood of the observed data using the Port
algorithm \code{\link{nlminb}}, and the specified initial or fixed
parameters and starting values. In each step of the optimsation, the
kinetic model is solved using the function \code{\link{mkinpredict}}. The
parameters of the selected error model are fitted simultaneously with the
degradation model parameters, as both of them are arguments of the
likelihood function.
}
\details{
Per default, parameters in the kinetic models are internally transformed in
order to better satisfy the assumption of a normal distribution of their
estimators.
}
\note{
When using the "IORE" submodel for metabolites, fitting with
"transform_rates = TRUE" (the default) often leads to failures of the
numerical ODE solver. In this situation it may help to switch off the
internal rate transformation.
}
\examples{
# Use shorthand notation for parent only degradation
fit <- mkinfit("FOMC", FOCUS_2006_C, quiet = TRUE)
summary(fit)
# One parent compound, one metabolite, both single first order.
# Use mkinsub for convenience in model formulation. Pathway to sink included per default.
SFO_SFO <- mkinmod(
parent = mkinsub("SFO", "m1"),
m1 = mkinsub("SFO"))
# Fit the model to the FOCUS example dataset D using defaults
print(system.time(fit <- mkinfit(SFO_SFO, FOCUS_2006_D,
solution_type = "eigen", quiet = TRUE)))
coef(fit)
endpoints(fit)
\dontrun{
# deSolve is slower when no C compiler (gcc) was available during model generation
print(system.time(fit.deSolve <- mkinfit(SFO_SFO, FOCUS_2006_D,
solution_type = "deSolve")))
coef(fit.deSolve)
endpoints(fit.deSolve)
}
# Use stepwise fitting, using optimised parameters from parent only fit, FOMC
\dontrun{
FOMC_SFO <- mkinmod(
parent = mkinsub("FOMC", "m1"),
m1 = mkinsub("SFO"))
# Fit the model to the FOCUS example dataset D using defaults
fit.FOMC_SFO <- mkinfit(FOMC_SFO, FOCUS_2006_D, quiet = TRUE)
# Use starting parameters from parent only FOMC fit
fit.FOMC = mkinfit("FOMC", FOCUS_2006_D, quiet = TRUE)
fit.FOMC_SFO <- mkinfit(FOMC_SFO, FOCUS_2006_D, quiet = TRUE,
parms.ini = fit.FOMC$bparms.ode)
# Use stepwise fitting, using optimised parameters from parent only fit, SFORB
SFORB_SFO <- mkinmod(
parent = list(type = "SFORB", to = "m1", sink = TRUE),
m1 = list(type = "SFO"))
# Fit the model to the FOCUS example dataset D using defaults
fit.SFORB_SFO <- mkinfit(SFORB_SFO, FOCUS_2006_D, quiet = TRUE)
fit.SFORB_SFO.deSolve <- mkinfit(SFORB_SFO, FOCUS_2006_D, solution_type = "deSolve",
quiet = TRUE)
# Use starting parameters from parent only SFORB fit (not really needed in this case)
fit.SFORB = mkinfit("SFORB", FOCUS_2006_D, quiet = TRUE)
fit.SFORB_SFO <- mkinfit(SFORB_SFO, FOCUS_2006_D, parms.ini = fit.SFORB$bparms.ode, quiet = TRUE)
}
\dontrun{
# Weighted fits, including IRLS
SFO_SFO.ff <- mkinmod(parent = mkinsub("SFO", "m1"),
m1 = mkinsub("SFO"), use_of_ff = "max")
f.noweight <- mkinfit(SFO_SFO.ff, FOCUS_2006_D, quiet = TRUE)
summary(f.noweight)
f.obs <- mkinfit(SFO_SFO.ff, FOCUS_2006_D, error_model = "obs", quiet = TRUE)
summary(f.obs)
f.tc <- mkinfit(SFO_SFO.ff, FOCUS_2006_D, error_model = "tc", quiet = TRUE)
summary(f.tc)
}
}
\seealso{
Plotting methods \code{\link{plot.mkinfit}} and
\code{\link{mkinparplot}}.
Comparisons of models fitted to the same data can be made using
\code{\link{AIC}} by virtue of the method \code{\link{logLik.mkinfit}}.
Fitting of several models to several datasets in a single call to
\code{\link{mmkin}}.
}
\author{
Johannes Ranke
}
